Manual control through main switch

Power supply voltage 1x220-230V ±5%

Frequency 50Hz

Powers from 0.25kW to 2.2kW

Direct start of motors through switch 0/1 with LEDs signalling mains presence

Protection degree IP55

Room temperature from -5°C to 40°C (limit foreseen by the standard EN 60439-1)

Maximum relative humidity of 50% at 40°C (limit foreseen by the standard EN 60439-1)

Wall fastening by means of Ø =4mm inserts

Enclosure in plastic material (ABS) upon request UL94 V0

Embedded run capacitor suitable for the power of the motor, from 16µ F to 70µ F

Output with two M20x1.5 cable clamps and eventual third output for PG16 (pump floating device)

Bipolar main switch (with mains warning LED)

Thermal protection with run protection within the panel (can be externally-manually restored) N.B. only on versions in which it is foreseen.

Patented terminal boards with rapid release allowing the use of female faston type 6.3 sp. 0.8 mm