La funzione del quadro è quella di consentire il comando dei motori delle pompe sommerse. Seguono le caratteristiche tecniche:
Comando manuale tramite interruttore generale
The function of the panel is that of allowing the control of the motors of the submersed pumps. Here below. there are the technical features:
Manual control through main switch
Power supply voltage 1x220-230V ±5%
Frequency 50Hz
Powers from 0.25kW to 2.2kW
Direct start of motors through switch 0/1 with LEDs signalling mains presence
Protection degree IP55
Room temperature from -5°C to 40°C (limit foreseen by the standard EN 60439-1)
Maximum relative humidity of 50% at 40°C (limit foreseen by the standard EN 60439-1)
Wall fastening by means of Ø =4mm inserts
Enclosure in plastic material (ABS) upon request UL94 V0
Embedded run capacitor suitable for the power of the motor, from 16µ F to 70µ F
Output with two M20x1.5 cable clamps and eventual third output for PG16 (pump floating device)
Bipolar main switch (with mains warning LED)
Thermal protection with run protection within the panel (can be externally-manually restored) N.B. only on versions in which it is foreseen.
Patented terminal boards with rapid release allowing the use of female faston type 6.3 sp. 0.8 mm
versione con interruttore 0/1 vers. with switch 0/1
versione con interruttore 0/1 + termico + predisposizione galleggiante (uscita Pg16 per utilizzo galleggiante) vers. with switch 0/1 + thermal switch + prearrangement floating device (output Pg16 + for floating device use)
